0-3000 PSI, 4-20mA Linear Output High Accuracy Pressure Transducers

Description

The 4-20mA linear output pressure sensor measures from pressure 0-3000 PSI when connected to a DATAQ Instruments Data Acquisition product or Data Logger.

Its 4-20mA linear output guarantees minimal signal losses compared to voltage type signals over long distances, and its output will not be significantly affected by supply voltage. Live zero reading verifies sensor is electrically functional.

The pressure sensor allows DATAQ Instruments data acquisition and data logger units to acquire oil, fuel, air, brake fluid (DOT3/DOT4) or water pressure (PSI) information. The combination of these two products provides a compact solution, with transducer excitation provided by the data logger. The logger itself allows data to be communicated to a connected PC over either a USB or Ethernet interface. Optionally, many data loggers can store data to a removable USB thumb drive to satisfy stand-alone applications. Even with a connected pressure sensor, the data logger channel capacity allows additional channels of information to be acquired and correlated with pressure information to satisfy nearly any level of measurement expansion.

 

Accessories

Specifications

Measurement Range:	2000361-3000HX-1: 0 to 3000 PSI
Material:	316 stainless steel and high temperature auto-graded plastic
Output:	4-20mA linear output
Supply Voltage:	8-30V
Long Term Working Temperature:	-40 to +85ºC (-40 to +185ºF)
Accuracy:	±0.5%FS
Thread:	1/8” NPT-27
Protection Class:	Typical IP65-66, depending on electric connection.
Overload Capacity:	2 times.
Pressure Medium:	Any gas or liquid compatible with 316L stainless steel
Long-term stability:	± 0.5%FS/year
Temperature Effect on Zero:	Typical: ±0.02%FS/ºC Maximum: ±0.05%FS/ºC
Temperature Effect on Sensitivity:	Typical: ±0.02%FS/ºC Maximum: ±0.05%FS/ºC
Response Time:	≤1ms
Insulation Resistance:	>100mΩ 500VDC
Explosion-proof Class:	ExiaTTCT6
Electromagnetism Compatibility:	EN61326-1-2013 EN61325-2-2:2013 EMC Directive 2014/30/EU
Wiring connector:	Water sealed quick-disconnect. Mating connector and wire harness (3 ft pigtail) included.
Wiring:	Red for +8-30V Supply Voltage Black for 4-20mA output Yellow or Green: No connected
Warranty:	90 days

Logger inaccuracy not included in these specifications.

Compatible Products

Reviews